Dynamic Host Configuration Protocol (DHCP) is an application layer protocol used to distribute various network configuration parameters to devices on a TCP/IP network. – IP addresses, subnet masks, default gateways, DNS servers, etc. DHCP employs a client-server architecture; a DHCP client is configured to request network parameters from a DHCP server on the network. A DHCP server is configured with a pool of available IP addresses and assigns one of them to the DHCP client.
A Cisco router can be configured as a DHCP server. Here are the steps:
- Exclude IP addresses from being assigned by DHCP by using the ip dhcp excluded-address FIRST_IP LAST_IP
- Create a new DHCP pool with the ip dhcp pool NAME command.
- Define a subnet that will be used to assign IP addresses to hosts with the network SUBNET SUBNET_MASK command.
- Define the default gateway with the default-router IP command.
- Define the DNS server with the dns-server IP address command.
- (Optional) Define the DNS domain name by using the ip domain-name NAME command.
- (Optional) Define the lease duration by using the lease DAYS HOURS MINUTES command. If you don’t specify this argument, the default lease time of 24 hours will be used.
Here is an example configuration:
Floor1(config)#ip dhcp excluded-address 192.168.0.1 192.168.0.50 Floor1(config)#ip dhcp pool Floor1DHCP Floor1(dhcp-config)#network 192.168.0.0 255.255.255.0 Floor1(dhcp-config)#default-router 192.168.0.1 Floor1(dhcp-config)#dns-server 192.168.0.1
In the example above you can see that I’ve configured the DHCP server with the following parameters:
- the IP addresses from the 192.168.0.1 – 192.168.0.50 range will not be assigned to hosts
- the DHCP pool was created and named Floor1DHCP
- the IP addresses assigned to the hosts will be from the 192.168.0.0/24 range
- the default gateway’s IP address is 192.168.0.1
- the DNS server’s IP address is 192.168.0.1
To view information about the currently leased addresses, you can use the show ip dhcp binding command:
Floor1#show ip dhcp binding IP address Client-ID/ Lease expiration Type Hardware address 192.168.0.51 0060.5C2B.3DCC -- Automatic
In the output above you can see that there is a single DHCP client that was assigned the IP address of 192.168.0.51. Since we’ve excluded the IP addresses from the 192.168.0.1 – 192.168.0.50 range, the device got the first address available – 192.168.0.51.
To display information about the configured DHCP pools, you can use the show ip dhcp pool command:
Floor1#show ip dhcp pool Pool Floor1DHCP : Utilization mark (high/low) : 100 / 0 Subnet size (first/next) : 0 / 0 Total addresses : 254 Leased addresses : 1 Excluded addresses : 1 Pending event : none 1 subnet is currently in the pool Current index IP address range Leased/Excluded/Total 192.168.0.1 192.168.0.1 - 192.168.0.254 1 / 1 / 254
This command displays some important information about the DHCP pool(s) configured on the device – the pool name, total number of IP addresses, the number of leased and excluded addresses, subnet’s IP range, etc.
Prerequisites for 200-301
200-301 is a single exam, consisting of about 120 questions. It covers a wide range of topics, such as routing and switching, security, wireless networking, and even some programming concepts. As with other Cisco certifications, you can take it at any of the Pearson VUE certification centers.
The recommended training program that can be taken at a Cisco academy is called Implementing and Administering Cisco Solutions (CCNA). The successful completion of a training course will get you a training badge.
Full Version 200-301 Dumps