Cisco uses the term interface to refer to physical ports on an IOS device. Interfaces can be configured with different settings, depending on the type of the interface and whether you are configuring an interface on a router or on a switch. For example, the Cisco 7201 Router has four GE physical ports (image source: Cisco):
To display the router interfaces in IOS, use the show ip int brief command from the privileged exec mode:
In the output above we can see that this router has 2 physical interfaces – FastEthernet0/0 and FastEthernet0/1.
Consider the output for the Fa0/0 interface:
Here is a brief description of each column:
- Interface – displays the type of the interface, in this case Fast Ethernet 0/0. The first zero specifies the physical slot on the router, while the second zero specifies the port number.
- IP-Address – displays the interface’s IP address.
- OK? – YES in this column signifies that the IP address is currently valid.
- Method – manual in this column means that the interface has been manually configured. DHCP means that the interface has been configured using DHCP.
- Status – up indicates that the interface is administratively up.
- Protocol – up indicates that the interface is operational.
To configure a specific interface, use the interface TYPE SLOT/PORT command from the global config mode. This puts us in the interface submode, where we can configure various interface options:
In the example above you can see that we’ve configured the speed option for the interface Fast Ethernet 0/0.
By default, all ports on a Cisco switch are up and running as soon as you power-on the device. This means that all you need is to connect your devices and the switch and you are good to go. This isn’t the case with Cisco routers, however. You need to manually enable each interface on a router with the no shutdown interface mode command:
Prerequisites for 200-301
200-301 is a single exam, consisting of about 120 questions. It covers a wide range of topics, such as routing and switching, security, wireless networking, and even some programming concepts. As with other Cisco certifications, you can take it at any of the Pearson VUE certification centers.
The recommended training program that can be taken at a Cisco academy is called Implementing and Administering Cisco Solutions (CCNA). The successful completion of a training course will get you a training badge.
Full Version 200-301 Dumps