One of the main protocols in the TCP/IP suite is Transmission Control Protocol (TCP). TCP provides reliable and ordered delivery of data between applications running on hosts on a TCP/IP network. Because of its reliable nature, TCP is used by applications that require high reliability, such as FTP, SSH, SMTP, HTTP, etc.
TCP is connection-oriented, which means that, before data is sent, a connection between two hosts must be established. The process used to establish a TCP connection is known as the three-way handshake. After the connection has been established, the data transfer phase begins. After the data is transmitted, the connection is terminated.
One other notable characteristic of TCP is its reliable delivery. TCP uses sequence numbers to identify the order of the bytes sent from each computer so that the data can be reconstructed in order. If any data is lost during the transmission, the sender can retransmit the data.
Because of all of its characteristics, TCP is considered to be complicated and costly in terms of network usage. The TCP header is up to 24 bytes long and consists of the following fields:
- source port – the port number of the application on the host sending the data.
- destination port – the port number of the application on the host receiving the data.
- sequence number – used to identify each byte of data.
- acknowledgment number – the next sequence number that the receiver is expecting.
- header length – the size of the TCP header.
- reserved – always set to 0.
- flags – used to set up and terminate a session.
- window – the window size the sender is willing to accept.
- checksum – used for error-checking of the header and data.
- urgent – indicates the offset from the current sequence number, where the segment of non-urgent data begins.
- options – various TCP options, such as Maximum Segment Size (MSS) or Window Scaling.
TCP is a Transport layer protocol (Layer 4 of the OSI model).
Prerequisites for 200-301
200-301 is a single exam, consisting of about 120 questions. It covers a wide range of topics, such as routing and switching, security, wireless networking, and even some programming concepts. As with other Cisco certifications, you can take it at any of the Pearson VUE certification centers.
The recommended training program that can be taken at a Cisco academy is called Implementing and Administering Cisco Solutions (CCNA). The successful completion of a training course will get you a training badge.
Full Version 200-301 Dumps