VLANs (Virtual LANs) are logical grouping of devices in the same broadcast domain. VLANs are usually configured on switches by placing some interfaces into one broadcast domain and some interfaces into another. Each VLAN acts as a subgroup of the switch ports in an Ethernet LAN.
VLANs can spread across multiple switches, with each VLAN being treated as its own subnet or broadcast domain. This means that frames broadcasted onto the network will be switched only between the ports within the same VLAN.
A VLAN acts like a physical LAN, but it allows hosts to be grouped together in the same broadcast domain even if they are not connected to the same switch. Here are the main reasons why VLANs are used:
- VLANs increase the number of broadcast domains while decreasing their size.
- VLANs reduce security risks by reducing the number of hosts that receive copies of frames that the switches flood.
- you can keep hosts that hold sensitive data on a separate VLAN to improve security.
- you can create more flexible network designs that group users by department instead of by physical location.
- network changes are achieved with ease by just configuring a port into the appropriate VLAN.
The following topology shows a network with all hosts inside the same VLAN:
Without VLANs, a broadcast sent from host A would reach all devices on the network. Each device will receive and process broadcast frames, increasing the CPU overhead on each device and reducing the overall security of the network.
By placing interfaces on both switches into a separate VLAN, a broadcast from host A would reach only devices inside the same VLAN, since each VLAN is a separate broadcast domain. Hosts in other VLANs will not even be aware that the communication took place. This is shown in the picture below:
To reach hosts in a different VLAN, a router is needed.
Prerequisites for 200-301
200-301 is a single exam, consisting of about 120 questions. It covers a wide range of topics, such as routing and switching, security, wireless networking, and even some programming concepts. As with other Cisco certifications, you can take it at any of the Pearson VUE certification centers.
The recommended training program that can be taken at a Cisco academy is called Implementing and Administering Cisco Solutions (CCNA). The successful completion of a training course will get you a training badge.
Full Version 200-301 Dumps