Get Full Version of the Exam
http://www.EnsurePass.com/200-150.html
Question No.1
Which three addresses are valid forms of an IPv6 Address: 2001:0DB8:0000:FE01:0000:0000:0000:0000? (Choose three.)
A. 2001:0DB8:0000:FE01:: B. 2001:DB8:0:FE01::
C. 2001:0DB8::FE01::
D. 2001:DB8:0:FE01:0:0:0:0
Correct Answer: ABD
Question No.2
Which VTP mode disallows the creation of local VLANs?
-
transparent
-
tunneling
-
server
-
client
-
off
-
native
Correct Answer: D
Explanation:
quot;A VTP client behaves like a VTP server and transmits and receives VTP updates on its trunks, but you cannot create, change, or delete VLANs on a VTP client. VLANs are configured on another switch in the domain that is in server mode.quot;
http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_52_se/configu ration/guide/swvtp.html#wp1205076
Question No.3
On a Cisco router, which configuration register setting bypasses the contents of the NVRAM?
A. 0x102 B. 0x2102 C. 0x2120 D. 0x2124 E. 0x2142
Correct Answer: E
Question No.4
For witch reason would you implement a VSAN?
-
to overcome the limitation of zoing
-
to virtualize storage
-
to segment the physical fabric into multiple logical fabrics
-
to overcome the limitations of LUN masking
Correct Answer: C
Question No.5
Which Cisco UCS power policy mode enables a configuration that can tolerate the loss of an input power circuit?
-
nonredundatnt
-
Grid
-
N 1 in normal mode
-
N 1 in high-density mode
Correct Answer: B
Explanation:
Grid Redundant (N N) – below: The purpose of the grid redundant mode is to enable a configuration that can tolerate the loss of either a power supply or a input power circuit. In grid- redundant mode the system can withstand the loss of any two power supplies. The Figure 5 shows the required wiringScheme for Grid Redundant power where N=2.
Question No.6
Refer to the exhibit. Which host can securely to the switch by using SSH?
A. |
10.1.15 |
B. |
10.200.200.1 |
C. |
10.2.1.1 |
D. |
10.9.1.2 |
Correct Answer: A
Question No.7
Which two descriptions of a Fabricpath network are true? (Choose two.)
-
A leaf node connects to servers.
-
Leaf nodes can be Layer 3 devices.
-
A spine node connects to other switch in the fabric.
-
There is a spanning tree protocol running between leaf and spine switches
-
A spine node connects to servers.
Correct Answer: BD
Question No.8
Which two networking devices forward data based on destination MAC address? (Choose two.)
-
Repeater
-
Bridge
-
Switch
-
Router
-
Hub
Correct Answer: BC
Explanation: http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9670/white_paper_c11- 465436.html
Question No.9
What happens when there is no entry in the Layer 2 CAM table that corresponds to the destination MAC address of an incoming frame?
-
The frame is flooded out of all forwarding ports in all VLANs.
-
The frame is flooded out of all forwarding ports in its VLAN, except the port on which it is received.
-
The switch drops the frame.
-
The frame is flooded out of all forwarding ports in its VLAN, including the port on which it is received.
Correct Answer: B
Question No.10
Which two of the following statements are true with respect to STP in this network? (Choose 2)
-
Both 5k#39;s have BPDU Guard and BPDU Filter enabled by default, while both 7k#39;s do not
-
Both 5k#39;s bridge Assurance enabled, while both 7k#39;s do not
-
7k#39;s is the root bridge for VLANs 100-150
-
Both 7K-3 and 7k-4 being vPC peers, are the root bridge for VLANs 100-150
-
No devices have a root cost higher than 1, since all devices are no more that 1 hop away from each other
Correct Answer: BE
Get Full Version of 200-150 Dumps