Get Full Version of the Exam
http://www.EnsurePass.com/220-1001.html
Question No.101
Ann, a user, reports that after setting up a new WAP in her kitchen she is experiencing intermittent connectivity issues. Which of the following should a technician check FIRST?
-
Channels
-
Frequency
-
Antenna power level
-
SSID
Correct Answer: A
Question No.102
About one week ago, access to files on a network server became significantly slower. Today, network files are completely unavailable. A technician is able to make a remote connection to the server. Which of the following should the technician check NEXT?
-
RAID 5 array
-
NIC configuration
-
Available storage space
-
RAM utilization
Correct Answer: A
Question No.103
A workstation was just moved to a new work location without a surge protector. It was working the day before, but now the PC will not power on, the fans will not spin, and there are no signs of activity. Which of the following should the technician do FIRST?
-
Check the power cable connection
-
Check the voltage of the PSU with a tester
-
Test for distended capacitors
-
Check the voltage switch
Correct Answer: A
Question No.104
A user wants to build a computer with a high-end CPU, plenty of RAM, and a high-end graphics card for online gaming. The user wants to verify that the graphics card is compatible with the motherboard. Which of the following connection types would the user MOST likely utilize to connect the video card to the motherboard?
-
PCle
-
ISA
-
AGP
-
USB
Correct Answer: A
Question No.105
An engineer is working at a remote site that does not have Internet access. Which of the following features should the engineer use to connect a laptop to the Internet if hotspot functionality is unavailable?
-
Tethering
-
Near field communication
-
Wireless LAN
-
Virtual private network
Correct Answer: A
Question No.106
A technician is replacing an older video card with a new high-end video card in a workstation. The installation was successful, the new card seated properly, and power is connected. However, upon booting, the computer now emits several beeps and will not boot, but shows no error messages. Which of the following is MOST likely the cause of this issue?
-
The BIOS is out-of-date
-
The is not enough PSU output
-
There is an onboard RAM mismatch
-
GPU is overlocked
-
The firmware is out-of-date
Correct Answer: B
Question No.107
A technician manually configured the wireless connection on the Chief Information Officer#39;s (ClO#39;s) new laptop so it can communicate with the network at the office. The CIO now is having trouble connecting to a guest WiFi hotspot. While the device has a gateway address and says it is connected, the CIO cannot access company email Which of the following would BEST resolve the issue?
-
Move the ClO#39;s laptop closer to the access point to obtain a better RF signal
-
Restart the wireless connection to obtain a self-assigned APIPA address
-
Assign a different IP address to the device in conflict with the ClO#39;s laptop
-
Set the network connection to use DHCP instead of a static address
-
Change the network#39;s SSID to a mobile hotspot to access company email
Correct Answer: B
Question No.108
A technician would like to install an internal storage drive for a computer. Which of the following cable connectors would MOST likely be used to transfer data? (Select TWO).
-
USB-C
-
IDE
-
SATA
-
USB-A
-
Motex
-
Lightning
Correct Answer: BC
Question No.109
You need to configure your mobile device to send and receive electronic messages from your company.
You must use the company#39;s WLAN as all e-mail services are on default non-secure ports.
The company#39;s WLAN is broadcasting across the company for easier access. Both incoming and outgoing servers require login credentials.
Use the following parameters:
Email address tech@techies com Password P@SSwOrd
Pop techies com Port 110 Security. None IMAP techies com Port 993 Security SSL smtp.techies.com Port 465 Security: TLS Company SSID Techies
Security WPA2 Passphrase P@SSwOrd SSID is not broadcasted
INSTRUCTIONS:
Update the mobile device#39;s parameters to fit the criteria.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.
Correct Answer: See explanation below
Explanation:
Question No.110
Company management wants to be able to give users the ability to work remotely during periods
of bad weather. Which of the following should be enabled to allow the workforce to do this?
-
NAT
-
VLAN
-
VPN
-
HIPS
Correct Answer: C
Get Full Version of 220-1001 Dumps