A+ 1002 Study Guide

A plus 1002 Sub-objective 3.4 – Dumps4shared

A plus 1002 Sub-objective 3.4

A plus 1002 Sub-objective 3.4 – Given a scenario, troubleshoot mobile OS and application issues.

Click here for the A+ Practice Test Bundle for A+ Exams 220-1001 & 220-1002

Welcome to ExamNotes by Dumps4shared! This section will treat the 220-1002 Objective “3.4 Given a scenario, troubleshoot common mobile OS and application issues.”–We will examine the symptoms of mobile device problems and the tools that can be used to mitigate them. We cover the systems to be addressed based on their representation in the objectives. Here is how that breaks down. The lion’s share of the mobile market belongs to the Linux-based Android OS followed by Apple’s iOS with the Windows platform coming in as the third.  There are of course other OSs that are proprietary to a manufacturer.

Click here for the A+ Practice Test Bundle for A+ Exams 220-1001 & 220-1002

Common symptoms

The goal here is to alleviate issues experienced on mobile
devices, like Smartphones and tablets that run mobile operating systems (OS).
These operating systems are optimized for mobile device architecture and
features including interoperability with other devices. When we address a
condition or tool it will generally be applicable to all of the covered
platforms. If a particular item is brand or OS specific we will point that out.
Let’s look at the symptoms.


When you find the screen difficult to read properly in a dark
room there could be several causes. The screen brightness could be set too low.
Always check this first. The adaptive or automatic brightness control could be
malfunctioning or set too aggressively. The battery saver will also change the
brightness. Turn these features off to see if the condition improves. If it
does, change the settings to something easier to read.


When you have an unreliable wireless connection first confirm
that the desired network is working and visible. Then it is always best to use
the system tools to diagnose the desired connection’s signal strength. For
Android this can be found in Settings> About phone> then check the Status
of the phone or SIM. The wireless signal strength, measured in decibels (dB). A
lower dB reading of -30 will be better than a high reading of -70. The
connection strength can be compared to other available networks by checking the
available list. The networks displayed show wireless signal strength indicators
as bars, more bars equals a better signal. Assuming your signal strength is
sufficient you should check the network settings. For the connected device, you
will be able to view and reset the IP address. If that fails, use the Forget
option will clear all related settings for the network and then you can
reestablish them. If the network is saved the connection will be automatic. To
connect to a Wi-Fi network from the available list the SSID will be displayed.
For hidden networks, you will need to manually enter the SSID and Passphrase.
Make sure you are not dropping your wireless connection when the device sleeps.
Set the Keep Wi-Fi on when device sleeps to On. When all else fails, use the
soft reset method, evaluate then as a last resort follow-up with the hard reset.

wireless connectivity

The “No wireless connectivity” condition differs from
“Intermittent wireless” in that we cannot assume that both devices are on and
transmitting. That needs to be established first. Your WAP should be seen by
your mobile device. If not validate the router operation with a second device.
Make sure you have the right SSID and passkey/password. When you cannot
establish a wireless connection at all the number one answer is Airplane Mode.
 It is surprisingly easy to turn this mode on. It will appear as an
Airplane icon in your notification bar when active. When it is on Airplane Mode
disables all wireless communication to the device. This includes Wi-Fi,
Cellular, Bluetooth, NFC, and GPS. After that, the same methods that apply to an
intermittent connection are valid here.

bluetooth connectivity

With Bluetooth, the devices connect by pairing with each other
while they are in Discovery mode. We’ll go over that term shortly. When devices
are not paired it is possible that they can’t see each other. For security and
power management Bluetooth devices only remain visible to unpaired devices for
roughly two minutes after startup, this is called Discovery mode or pairing
mode, and after that time the device will only be seen by paired devices. The
visibility time can be set to provide more time if needed. It’s easy to
initiate the pairing process for a headset by cycling the power off and on or
pressing a designated button or button combination. However, on a smartphone or
tablet, you should activate Discovery mode in the Bluetooth >Settings of the
device for it to remain visible to all devices and scan for connections for the
allotted time, this will usually be two minutes but can be adjusted if you need
more time. Both devices need to be in Discovery mode at the same time. At the
first pairing Bluetooth creates a very small network of between two and eight
devices known as a Personal Area Network (PAN), also called a piconet. The
paired devices will remember each other and pair automatically. Retry pairing
when paired devices do not automatically connect. If this fails you may have to
“Forget” the existing pairing and start fresh.

broadcast to external monitor

The capability to broadcast your smartphone’s screen wirelessly
to a monitor or smart TV can be accomplished either using a hardware adapter on
the Monitor and/or software app installed on the phone. Wi-Fi Direct and
Wireless Display (WiDi) technology have made this capability almost routine.
Hardware device based methods like Chromecast, Miracast or Apple’s Airplay use
a dongle attached to the display to mirror or stream the content. Other newer
devices have the capability built in. There is a difference in the
technologies. Miracast technology displays your mobile device screen to the
HDTV or monitor. In this case, the device has to remain awake or active. When
your mobile screen goes blank the display does also. Chromecast uses your
mobile device to identify the desired content. Once it finds the content
Chromecast streams it to the TV and your phone is no longer necessary. This
represents significant mobile battery savings.

Problems you could encounter come from third-party VPN software.
Some cloud-based services install a VPN during setup. VPN programs regard WiFi
Direct (used by Miracast) a threat and disable them. The first troubleshooting
step is to make sure both devices are supported by the respective
manufacturers. Then check for VPN services running on the mobile device and
stop them. If you are still unsuccessful you may have to uninstall the VPN


A non-responsive touch screen can have a variety of causes, to
get back in First if you have a screen protector, remove it. If you are wearing
gloves or your hands are wet resolve that first. Then clean the screen and your
hands thoroughly.  Evaluate operation.  If unresolved turn the device
off. Don’t reinstall the screen protector until it can be ruled out as a
problem, Restart the device and recalibrate the screen if necessary.

not loading

If you have a condition where apps will not load or load slowly,
the first thing to check is the amount of available storage on the device.
Cached app files can get large and should be cleared periodically. Resources
are finite and unused apps should be uninstalled to free up storage space.

App loading


Over time your mobile device may feel like it is slowing down.
This condition can most often be resolved by restarting the device. This is
because an app disappears from view when a new app is launched and does not
close. The old app remains running in the background and is consuming
resources. If restarting is not an option use the action bar to view your
running apps. Between restarts, you will open quite a few apps. Manufacturers
recommend restarting the device regularly to minimize this condition.

to decrypt email

Since email encryption depends on Public and Private Keys. These
would be the first areas to check when there is a failure in the decryption
process. In this case, the private key stored on your device does not use your
previously distributed public key. In most cases, the simplest solution would
be to generate new public/private keys and distribute the public key to those
individuals you communicate with using encryption.

short battery life

In cases where you feel your battery life between charges has
decreased, the first consideration is what kind of load the battery is
supporting. Apps and services use battery services. Stop all apps running in the
background and disable unused Bluetooth and Wi-Fi connections. The wireless and
Bluetooth transmissions consume a lot of battery resources. Follow the steps
above and reevaluate the condition. Also consider here the age of the battery.
Old batteries do not hold a charge as long as new ones.

Battery running low


Overheating can result from running too many background apps running, having you display on for extended periods or when charging. Having your screen active for too long will cause the device to heat up. Close all unneeded apps running in the background, turn the display off, let device cool and evaluate. A device that gets hot when charging should be disconnected immediately. Very importantly examine the battery carefully for signs of swelling, which is a dangerous condition. Remove the battery and allow it to cool to room temperature. If the battery is swollen replace it immediately. Do not take chances with a swollen battery. If it is not swollen reinstall the battery and re-evaluate the condition. Try using a different charger and cable, as one of those may be defective. If the problem persists have the device serviced or the battery replaced.

Click here for the A+ Practice Test Bundle for A+ Exams 220-1001 & 220-1002


When your system freezes once simply restart and see if the
device behaves. If it doesn’t try checking that you have sufficient free
storage and perform a manual OS update check. Install any available updates and
evaluate. Determine if the problem is with the system or the installed apps.
Follow the device manufacturer’s instructions for starting the device in safe
mode. Safe mode starts the device using only the installed operating system at
the manufacturer’s defaults. If the problem disappears. You know the problem is
with the installed third party apps. Restart and begin to remove the installed
apps. Begin with anything installed around the time the problem presented.

sound from speakers

When you have no sound on your device the first thing to check
is the volume setting. Be sure the speakers are not muted. Check the physical control
then check your sound settings. Audio problems of this nature can also result
from the audio output being redirected to Bluetooth.

No audio

touch screen response

Your touch screen responsiveness and accuracy depend on whether
it uses capacitive or resistive technology. The majority of devices use
capacitive touch screens. These screens determine your taps based on the
electrical charge of your skin and are quite accurate. Seldom requiring
alignment in normal conditions. Capacitive touch-screen response can be
influenced by things like screen protectors, rubber gloves, and wet hands. Make
sure your screen is clean and your hands are dry and not gloved. Resistive
touch screens use two clear conductive sheets to determine your contact by using
the points that the two screens touch based on the pressure of your finger or
stylus. Resistive screens need to be calibrated using system tools. Resistive
screens are preferred in environments where the user’s hands are damp or

System lockout

Repeated bad unlock attempt will cause protected devices to lock either for a predetermined length of time or permanently depending on how your configuration is set. For Android devices, access can be restored by using your Google account or getting an app from the play store. Apple iOS devices, on the other hand, require the device to be reset to factory defaults.

Click here for the A+ Practice Test Bundle for A+ Exams 220-1001 & 220-1002

App log errors

When troubleshooting an issue that could be attributed to an
app get as much information as you can. Many apps maintain log files related to
errors that contain information about the hardware platform OS version and
other applications running at the time of the error. The error logs could be
located using the help menu or by contacting support.
That’s all for 3.4. Carry on! Good luck on the

Pass Your IT Certification Exams With Free Real Exam Dumps and Questions

Full Version 220-1002 Dumps