Categories
A+ 1002 Study Guide

Free- Exam Objective 3.7 – Dumps4shared

A plus 220-1001 – Exam Objective 3.7

A+ Exam Objective 3.7

Click here if you want to go back to the A+ 220-1001 Table of Content

3.7 Summarize power supply types and features.

Click here for our A+ Exam Simulator for exams 220-1001 & 220-1002

Welcome to Exam Notes by Dumps4shared! In
this article, we will cover Core 1 objective 3.7 Summarize power supply
types and features.

Input 115V vs.
220V

When hooking up the power to your system, one of the main things
you’ll notice is that directly near the three-prong power connector is a small
switch that reads 115/230. This switch allows the PSU to accommodate
international voltage and allows you to provide the correct voltage to your PC.

24-pin motherboard adapter

The main function of a power supply is to provide the correct
amount of power to the motherboard. The connection between the power supply and
the motherboard has evolved from a single connector into a two-part connector, the
20+4 pin connector. This connector will supply the appropriate power to where
it is needed. In the image below, the white connector is the legacy connector
and can be compared to the newer 20+4 pin. On the newer 20+4 pin, the
additional four pins are free and can be moved over in order to provide an
additional 12 volts to the processor. Both connectors shown below are the main
connectors to the motherboard and operate at +3.3V, +/- 5V, and +/- 12V.

Motherboard
power connectors: 20 (white) and 24 pin (black).

Output 3.5V, 5V and 12V

Here’s a look at the connectors you will find on an ATX
power supply. Listed first are the connectors that supply power to the drives
and provide supplemental power to the motherboard.

• Wattage rating

Any discussion of a
power supply will include wattage. For a power supply, wattage is the amount of
power that can be delivered to the system. When selecting a power supply, ensure
you are delivering the correct amount, i.e. an amount that will support the sum
of the components your system will have. Different processor and memory
combinations will have different power requirements. Use an online wattage
calculator to determine your needs, then add on another 10% on top for power peaks.

Number of devices/types of devices to be powered

This is a crucial element of power supply selection. When
replacing a power supply, always select a replacement power supply with the
same wattage or higher. For a new build, you can calculate your power needs
using an online wattage calculator. You’ll be surprised how much power you need.
As you add drives, expansion cards, and fans you’ll see your power requirement
rise. The motherboard, processor, and memory will also play a role. For example
after using one power supply calculator, the calculated requirement for an
older processor was 502 W (this is a load of 452 W + 10%). When we plugged in (😊) values for the latest
Socket/ CPU, our load jumped to 681 W + 10% = 731 recommended wattage. Always
get a bigger power supply than you need. 
You’ll never know when you may want to add a hard drive or DVD player.

That’s all for objective 3.7. Good luck on the test!

Click here if you want to go back to the A+ 220-1001 Table of Content

Click here for our A+ Exam Simulator for exams 220-1001 & 220-1002

Pass Your IT Certification Exams With Free Real Exam Dumps and Questions

Full Version 220-1002 Dumps